EL Wire Tips & Info

Your Experts In Polyurethane Resin 3D Doming Technology

4/7/2016 by ThatsCoolWire

TAKE A LOOK

Your Experts In Polyurethane Resin 3D Doming Technology

We are experts in high quality automotive grade polyurethane doming that will give your labels, decals, emblems and nameplates a protective 3D clear domed surface you can count on for years.

Our two-part automotive grade clear weather resistant and non-yellowing polyurethane resin can be trusted because it has been used for over 30 years.

Our two-part polyurethane resins and our equipment can be used for numerous indoor and outdoor applications that will give you superior 3D clear domed surface.

·     Domed Decals

·     Encapsulating

·     Potting

·     Coating Vinyl Signs, LOGOS……

Our epoxy resins can also be used for doming, encapsulation and coating porous substrates.

Call us today Toll Free 866-435-9473 or email us info@thatscoolwire.com and put our experienced to work for you in applying our 3D clear coating to your project.


TAKE A LOOK


3-EASY-Ways To Get Started


--- WE DO IT ALL ---

  • Call us Toll Free 866-435-9473 or email us info@thatscoolwire.com
  •  We provide the artwork – There is an artwork development charge
  • We provide the vinyl labels / decals
  •  We do the printing
  •  We dome it
  •  We ship it to you or your customer

 --- YOU PROVIDE THE ARTWORK ---

  • Call us Toll Free 866-435-9473 or email us info@thatscoolwire.com
  •  You provide the artwork
  • We provide the vinyl labels / decals
  •  We do the printing
  •  We dome it
  •  We ship it to you or your customer

--- YOU PROVIDE EVERYTHING AND WE DOME IT ---

  • Call us Toll Free 866-435-9473 or email us info@thatscoolwire.com
  •  You send us your printed vinyl sheets with your labels / decals
  •  We dome it
  •  We ship it to you or your customer

Guidelines

Thank you for your interest in our Doming Service. We will dome samples or prototypes at no charge just send us your sample.

Specific Quotes

Please provide the following:

  1. Size and shape of the part
  2. Layout
  3. Sheet size
  4. Quantity
  5. Do you have artwork or do you need us to design?
  6. Need date

Polyurethane Resins

  • Dispensed as clear liquid
  • Cures to clear
  • crystal dome

Follow These Guidelines

  1. Use most economic layout on 20" x 14" workspace
  2. Keep at least 2 edges of sheet rue to registration
  3. Leave a minimum of 3/16" between pieces
  4. Kiss cut and weed sheets
  5. Do not cut through release liner
  6. If emboss is necessary, try to keep as low as possible
  7. Do not use clear overlaminates
  8. Send set-up sheets if available
  9. Round corners where possible
  10. Avoid sharp angles on inside cuts
  11. Use double sided release liner
  12. Do not use paper as a substrate

Note:

  • Reflective properties of domes may alter color slightly.
  • Whites adjacent to color may take on hue of the adjacent color
  • Test samples for color accuracy.